Paper Size - Kyocera KM-3050 Operation Manual

OPERATION GUIDE
1
Press the System Menu key.
2
Press [Common Settings], [Change] of Original/Paper Setup, [Change] of
MP Tray Setting, and then [Change] of Paper Size.
3
For automatic detection of the paper size, press [Auto] and select [Metric]
or [Inch] as the unit.
To select the paper
size, press any of
[Standard Sizes 1],
[Standard Sizes 2],
[Others] or [Size
Entry] and select the

paper size.

If you have chosen
[Size Entry], press
[+] or [–] to enter X
(horizontal) and Y
(vertical) sizes. You
may enter the size
directly using the
numeric keys by
pressing [# Keys].
4
Press [OK].
5
Press [Change] of Media Type and select the media type. Then press [OK].
Common Settings - Multi Purpose Tray Setting
Set the multi-purpose tray paper size.
A3 A4
Auto
Standard A6 B4
Sizes 1
B6
Standard
Sizes 2
Others
Size Entry
Status Paper is present in Document Processor.
Common Settings - Multi Purpose Tray Setting
Set the multi-purpose tray paper size.
Auto
X(148 - 432)
432 mm
Standard
Sizes 1
Standard
Sizes 2
Y(98 - 297)
Others
mm
297
Size Entry
Status Paper is present in Document Processor.
Preparation before Use
A4 A5
B5 B5
Cancel OK
10/5/2006
# Keys
# Keys
Cancel OK
10/5/2006
2-39
10:10
10:10