Kyocera KM-3050 Operation Manual page 100

Basic Operation
3-26
Data to be entered are as follows.
Item
Host Host name or IP address of FTP server
name*
Path Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in home
directory.
Login FTP server log-in user name
User
Name
Login FTP server log-in password
Password
* Specify the port number different from the default (21) using the
format of Host Name: Port No.
6
Upon completion of
all entries, press
[Connection Test] to
check the
connection.
NOTE:
Connected. appears when connection to the destination is
correctly established. If Cannot connect. appears, review the entry.
If you wish to specify another destination, go to the next step. If the
destination is only one, go to the step 8.
7
Press [Next Dest.] and repeat the steps 5 to 7 to specify the destination.
Up to 10 folders (total number of SMB and FTP folders) can be specified.
NOTE:
When [Add to Addr Book] is displayed, the entry is registered in
the address book.
8
Press [OK] to register the entry in the destination list.
9
Check the destination list.
Select a destination and press [Detail/Edit] to check and edit it. Edit it, if
necessary, referring to the steps 4 to 6.
Data to be entered
Ready to send.
Place original.
Folder Path Entry
Host Name
SMB
Path
FTP
Login
User Name
Login
Password
Add to Addr Book Next Dest.
Status Executing TX job .
Max.
characters
Up to 62
characters
Up to 126
characters
Up to 62
characters
Up to 62
characters
Destination
1
Connection
Test
Cancel OK
10/5/2006 10:10
OPERATION GUIDE