Kyocera KM-3050 Operation Manual page 167

Error Message
Staple jam.
The memory card is
not formatted.
The phone receiver is
off the hook.
The removal memory
is not formatted.
The source file is not
found.
Top tray of the
machine is full of
paper.
Tray # is full of paper.
Warning low memory.
OPERATION GUIDE
Checkpoints
–
Is the memory card
formatted?
–
Is the removable memory
formatted by this machine?
–
–
Is the acceptable storage
capacity exceeded for any of
the trays A to C of the 3,000-
sheet capacity document
finisher?
–
Corrective Actions
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
staple.
Format the memory card.
Put down the receiver.
Use the removable memory
formatted by this machine.
The specified file is not found. This
job is canceled. Press [End].
Remove paper from the top tray, and
press [Continue] to resume the job.
Remove paper from the tray #
indicated on the touch panel.
If the tray B or C is full of paper, press
[Continue] to resume printing.
Further scanning cannot be
performed by insufficient memory
Press [Continue] to print the scanned
pages. Press [Cancel] to cancel the
printing job
Troubleshooting
Reference
Page
4-8
—
—
—
—
—
—
—
6-11