Kyocera KM-3050 Operation Manual page 94

Basic Operation
3-20
1
Place the originals on the
platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading Originals on page 2-40.
2
Press the Send key.
3
Press [E-mail Addr Entry] and then [E-mail Address].
NOTE:
Destination can be specified using the address book or the one-
touch keys. Refer to Specifying Destination on page 3-33.
4
Enter destination E-
mail address and
press [OK].
5
Press [To:], [Cc:] or [Bcc:] to change the recipient status as necessary.
To specify another destination, go to the next step. To specify only one
destination, go to the step 7.
6
Press [Next Dest.] and repeat the steps 4 and 5 to specify the destination.
Up to 100 E-mail addresses can be specified.
NOTE:
When [Add to Addr Book] is displayed, the destinations are
registered in the address book.
Ready to send.
Place original.
E-mail Address Entry
E-mail Address Entry
E-mail
Address
To:
Cc:
Add a new E-mail destination.
Press [E-mail Address], then enter
the address using the keyboard screen.
To:/Cc:/Bcc: can also be set.
Add to Addr Book Next Dest.
Status
Destination
0
Bcc:
Cancel OK
10/5/2006 10:10
OPERATION GUIDE