Kyocera KM-3050 Operation Manual page 166

Troubleshooting
Error Message
Send Error.
Job is canceled. Press
[End].
####
Set the folding tray.
Set the folding unit.
Set the punch waste
box.
Set the waste toner
box.
Staple error.
6-10
Checkpoints
–
Is the folding tray correctly
set to the 3,000-sheet
capacity document finisher?
Is the folding unit correctly
set to the 3,000-sheet
capacity document finisher?
–
–
–
Corrective Actions
2101, 2102, 2201, 2202, 2203, 3101:
The network cable is disconnected or
the hub that it is connected to is not
operating properly. Check the cable
and the hub. Otherwise, the server
name or the host name of the SMTP
server is not set correctly. Use
COMMAND CENTER and register
the SMTP server name and the host
name correctly.
2204: The E-mail size exceeds the
acceptable send data capacity.
Decrease the size or resolution of the
scanned data to be transmitted and
resend the E-mail.
9181: The scanned original exceeds
the acceptable number of pages of
999. Send the excess pages
separately.
Set the folding tray correctly to the
3,000-sheet capacity document
finisher. For details, refer to the
Operation Guide of the 3,000-sheet
capacity document finisher.
Set the folding unit correctly to the
3,000-sheet capacity document
finisher. For details, refer to the
Operation Guide of the 3,000-sheet
capacity document finisher.
The punch waste box of the
document finisher or 3,000-sheet
capacity document finisher is not set
correctly.
Follow the instruction on the touch
panel to set the punch waste box
correctly.
The waste toner box is not set
correctly. Set it correctly.
If a staple error occurs, the machine
will stop and the corrective action will
be indicated on the touch panel.
Leave the machine on and follow the
instruction to take an appropriate
action.
Reference
Page
2-12
—
—
—
—
—
5-7
—
OPERATION GUIDE