Kyocera KM-3050 Operation Manual page 48

Preparation before Use
Enabling FTP Function
Item
FTP
FTP Port Number
2-18
The FTP transmission function converts the data of originals scanned on
this machine to the PDF, TIFF, or JPEG format and uploads it directly to
an FTP server.
The FTP parameters can be set through the COMMAND CENTER.
The following information is required about each server in order to register
them on this machine. If you are unsure about this information, seek help
from the server administrator.
• Login user name (using operation panel)
• Password (using operation panel)
• Host name or IP address of FTP server
• Port number (normally 21)
• Path (path from the home directory of the FTP server to the folder for
storage)
• Shares the FTP server
Login user name and Login password are identical to the FTP User login.
The FTP user account for the machine needs to be installed and
administrated at the FTP server.
Scanner > FTP page
The table below lists the settings displayed on the scanner FTP page.
Switches FTP on or off.
You can enter the port number to be used by FTP.
Description
OPERATION GUIDE