Sony HDCU-950 Installation And Maintenance Manual page 23

. S206
Factory setting : All OFF
-1, 2
Factory use only
-3 (MAIN/MONI CHANGE)
When this switch is set to ON, the character signal and
the marker signal are mixed with the all output signals
except the HD-SDI-MONITOR output.
ON : Change mode
OFF : Normal mode
-4 (MONI CHARACTER OFF)
Selects whether the character signal and the marker
signal are mixed or not to the signal to be output from
the MONI connector on the rear panel.
ON : Forced-OFF (Not mixed)
OFF : Normal mode (Mixed)
-5 (GRAY SIGNAL BAR-CHAR ON/OFF)
This switch enables mixing of the color bar character
with the gray signal that is output when camera is turned
off.
ON : GRAY BAR-CHAR ON
OFF : GRAY BAR-CHAR OFF
HDCU-950 IMM
1-6. Setting of Switches on Boards
1-15 (E)