Removing The Microsd Card; Removing The Sim Card - Motorola MC9500-K User Manual

Removing the microSD Card

To remove an microSD card:
CAUTION Suspend the MC9500-K prior to removing the battery. Failure to properly remove the battery may cause
the MC9500-K to cold boot and potential loss of data.
If the MC9500-K is in suspend mode, press the red Power button to wake the device.
1.
Press the red Power button to suspend the MC9500-K.
2.
Wait for red Decode LED to turn on and then turn off.
3.
Unhook the handstrap.
4.
Remove the battery.
5.
Remove the SD card cover using a flathead screwdriver.
6.
Slide the SD card holder door to the left to unlock.
7.
Lift the microSD card holder door.
8.
Remove microSD card from holder.
9.
Close the microSD card holder door.
10.
Slide the microSD card holder door to the right to lock into place.
11.
Align the SD card cover over the access hole and press down until it snaps into place.
12.
Replace the battery.
13.

Removing the SIM Card

To remove an SIM card:
CAUTION Suspend the MC9500-K prior to removing the battery. Failure to properly remove the battery may cause
the MC9500-K to cold boot and potential loss of data.
If the MC9500-K is in suspend mode, press the red Power button to wake the device.
1.
Press the red Power button to suspend the MC9500-K.
2.
Wait for red Decode LED to turn on and then turn off.
3.
Unhook the handstrap.
4.
Remove the battery.
5.
Remove the SIM card cover using a flathead screwdriver.
6.
Slide the SIM card holder door to the left to unlock.
7.
Lift the SIM card holder door.
8.
Remove SIM card from holder.
9.
Getting Started 1 - 9