Serial Port Services - Motorola MC9500-K User Manual

7 - 12 MC9500-K Mobile Computer User Guide
WWAN Bluetooth Audio Notification Dialog Box
Figure 7-11

Serial Port Services

Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
3.
Tap Add new device. The MC9500-K begins searching for discoverable Bluetooth devices in the area.
4.
Select a device from the list.
5.
Tap Next. The Enter Passcode window appears.
6.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
7.
In the device list, tap the serial device. The Partnership Settings window displays.
8.
Select the Serial Port checkbox.
9.
Tap Save.
10.
Tap COM Ports tab.
11.
Tap New Outgoing Port. The add device window appears.
12.
Select the serial device in the list and then tap Next.
13.
Select a COM port from the drop-down list.
14.
Tap Finish.
15.
NOTE No connection is made at this point. An application must open the selected COM port to trigger Microsoft
Bluetooth stack to open the connection.
Headset icon