Hands-Free Services - Motorola MC9500-K User Manual

Click Connect. The computer connects to the device via Bluetooth.
e.
NOTE If your computer is Bluetooth-enabled and you select Bluetooth as the PC connection, you must initiate and
complete the Bluetooth PAN partnership before Internet Sharing will work. For more information, refer to
Windows Help and Support.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
8.
To end dial-up networking, on the MC9500-K tap Disconnect.
9.

Hands-free Services

To connect to a Bluetooth headset:
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the MC9500-K speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Settings > Connections > Bluetooth icon.
3.
Tap New device. The MC9500-K searches for Bluetooth devices in the area.
4.
Select the headset name and tap Next. The Passcode window appears.
5.
Enter the headset's passcode.
6.
Tap Next. The MC9500-K connects to the headset. Refer to the headset user manual for instructions on
7.
communicating with a Bluetooth device.
NOTE During an active connection, the MC9500-K cannot go into suspend mode when the Power Button is
pressed. A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Using Bluetooth 7 - 11