Single Slot Battery Charger; Four Bay Ethernet Cradle - Motorola MC9500-K User Manual

9 - 10 MC9500-K Mobile Computer User Guide

Single Slot Battery Charger

Single Slot Battery Charger
Table 9-4
Symptom
Spare battery is not
charging.

Four Bay Ethernet Cradle

Troubleshooting the Four Bay Ethernet Cradle
Table 9-5
Symptom
During
communication, no
data transmits, or
transmitted data was
incomplete.
Possible Cause
Battery not fully Remove and re-insert the spare battery in the cradle, ensuring it is
seated in charging properly seated.
slot.
Battery inserted Re-insert the battery so the charging contacts on the battery align
incorrectly. with the contacts on the cradle.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
No power to Ensure that power is applied to the charger. The Battery Status
charger. LED flashes amber to indicate that the battery is charging.
Single Slot Battery Replace the Single Slot Battery Charger.
Charger is not
functioning
properly.
Cause
MC9500-K removed Replace MC9500-K in cradle and retransmit.
from cradle during
communications.
MC9500-K has no The Link LED flashes yellow if there is an active connection. See
active connection. Four Bay Ethernet Cradle on page
Action
Solution
8-9.