Audio Modes; Using A Wired Headset - Motorola MC9500-K User Manual

Audio Modes

The MC9500-K offers three audio modes for use during phone calls:
•
Handset Mode: Switches audio to the speaker at the top front of the MC9500-K, so you can use the
MC9500-K as a handset. This is the default mode.
•
Speaker Mode: Use the MC9500-K as if on speaker phone. Tap the Speaker On button to activate this
mode. Tap the Speaker Off button to switch back to handset mode.
•
Headset Mode: Connect a Bluetooth headset or a wired headset to automatically switch audio to the
headset.
The MC9500-K defaults to handset mode. When a wired headset is plugged into the MC9500-K headset connector
or a Bluetooth headset is configured for use with the MC9500-K, the earpiece and speakerphone are muted and
audio is heard through the headset.
NOTE While using a Bluetooth headset during a call, the mobile computer will not go into suspend mode.
Handset Mode
Audio Modes
Figure 5-3

Using a Wired Headset

NOTE Remove the headset jack plug before connecting the Headset Adapter to the MC9500-K.
You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack of the Headset Adapter Cable into the headset connector on the side of the
MC9500-K. Plug the Headset connector into the connector on the Headset Adapter Cable. Set the MC9500-K's
volume appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
Speaker Mode
Using the Phone 5 - 3
Headset Mode