Removing The Microsd Or Cryptr Card; Installing The Public And Private Sim Cards; Figure 5: Installing The Microsd Or Cryptr Micro Encryption Card - Motorola LEX L10g User Manual

Level 3 storage for credentials/keys for Data At Rest (DAR) encryption and MVPN. The slot of the card
is located under the battery
When and where to use:
NOTICE: The LEX L10g may be delivered to you with battery, SIM card, and microSD or
CRYPTR card already installed, activated, and ready for use. In case a CRYPTR is pre-
installed in the device, you must change the CRYPTR password provided by your technical
support. This is not a password to access the device but a password to protect Motorola
Solutions secure applications. The CRYPTR password is required whenever the device is
restarted.
Procedure:
1 Slide the card into the card holder slot with contacts facing down.
2 Push the card into the slot until it is fully seated and locked into place.

Figure 5: Installing the microSD or CRYPTR micro Encryption Card

2.3.4

Removing the microSD or CRYPTR Card

This procedure explains how to remove a microSD or CRYPTR micro encryption card.
Procedure:
1 Press and hold the Power button for three seconds.
2 Touch Power Off.
3 Touch OK.
4 Lift the battery cover.
5 Push the Card Holder lock down to release the card.
6 Remove the card from the holder.
7 Replace the battery cover.
2.3.5

Installing the Public and Private SIM Cards

Public and private phone services require a Subscriber Identification Module (SIM) card.
Prerequisites: The SIM card can contain the following information:
• Mobile phone service provider account details.
• Information regarding service access and preferences.
Send Feedback
MN002858A01-A
Chapter 2: Getting Started
35