Resume; Using Microsoft Bluetooth Stack; Turning The Bluetooth Radio Mode On And Off; Enabling Bluetooth - Motorola MC9500-K User Manual

Resume

When the MC9500-K resumes, Bluetooth turns on if it was on prior to suspend.

Using Microsoft Bluetooth Stack

The following sections provide information on using the Microsoft Bluetooth stack.

Turning the Bluetooth Radio Mode On and Off

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the
radio is off, other Bluetooth devices cannot see or connect to the MC9500-K. Turn on the Bluetooth radio to
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close
proximity.
NOTE To achieve the best battery life turn off radios not in use.

Enabling Bluetooth

To enable Bluetooth:
Tap Wireless Manager and then tap the Bluetooth bar or
1.
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Bluetooth Mode Tab
Figure 7-2
Check the Turn On Bluetooth checkbox.
2.
Tap ok.
3.

Disabling Bluetooth

To disable Bluetooth:
Tap Wireless Manager and then tap the Bluetooth bar or
1.
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Un-check the Turn On Bluetooth checkbox.
2.
Using Bluetooth 7 - 5