Available Services - Motorola MC9500-K User Manual

7 - 8 MC9500-K Mobile Computer User Guide
Bluetooth Connection Confirmation
Figure 7-7
You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and
tap Next. If the device does not have a specific passcode, enter a passcode in the Passcode field and tap
Next. The Bluetooth radio tries to connect with the device.
If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the
9.
created passcode to establish a paired connection. (If you entered a passcode from the device, you shouldn't
have to do anything on the other device.)
When the connection is complete, a list of matching and supported services on the device appears.
10.
Select the services you want to use and tap Finish. The services on the new devices have to be selected or
11.
else the pairing won't include those services, even though the devices are paired. If services are not selected,
you will be continually reprompted for the passcode from the device.
The device appears in the list on the main window.
12.
After the passcodes have been accepted on both sides, you have a trusted ("paired") connection.

Available Services

NOTE Some devices might not require a PIN. This depends upon the device's authentication.
The MC9500-K with Microsoft Bluetooth stack offers the following services:
•
OBEX Object Push Services via Beam
•
Hands-Free Audio Gateway Services
•
Serial Port Services
•
Personal Area Networking Services
•
PBAP Services
•
Dial-up Networking
•
HID Client
•
A2DP/AVRCP.
See the following sections for information on these services.