Chapter 3 Using The Mc9500-K; Introduction; Led Indicators - Motorola MC9500-K User Manual

Chapter 3 Using the MC9500-K

Introduction

This chapter explains the indicators, buttons, status icons, and controls on the MC9500-K, and provides basic
instructions for using the device.

LED Indicators

The MC9500-K has three LED indicators. The Decode LED indicates scanning status. The Battery Status LED
indicates battery charging and health status.The WAN Radio Status LED indicates WAN radio status.
describes the LED indications.
WAN Radio
Status LED
LED Indicators
Figure 3-1
LED Indications
Table 3-1
Decode LED
Solid Green
Solid Red
Blinks Red
Battery Status
Decode LED
LED
LED State Indication
Successful decode/capture.
Scanning/imaging in process.
After the Power button is pressed, turns on and then off to
indicate that the battery can be removed.
Table 3-1