Removing The Fan - Sanyo SAP-KRV96EHDS Technical & Service Manual

8-10. Removing the Fan

NOTE Be sure to proceed after having removed
the drain pan (Air Outlet Ass'y) and fan
motor according to sections "8-8. and 8-9."
(1) Remove 3 screws.
(2) Uphold the left side of the head exchanger so that it is
not seated anywhere (so as to remove the fan).
Pull the fan bearing toward you and remove it, and
remove the fan as pulling it from underneath.
NOTE When sliding the heat exchanger or remove the fan,
be sure to wear work gloves so as not to injure your
hands by fins of the heat exchanger.
37
Heat exchanger
Heat exchanger
Fan
Fan bearing