Removing The Fan - Sanyo SAP-KRV94EHDX Technical & Service Manual

8-8. Removing the Fan

Be sure to proceed after having removed
NOTE
the drain pan (Air Outlet Ass'y) and fan
motor according to sections "8-5. and 8-7."
(1) Remove three screws.
(2) Uphold the left side of the heat exchanger so that it is
not seated anywhere (so as to remove the fan).
Pull the fan bearing toward you and remove it, and
remove the fan as pulling it from underneath.
When sliding the heat exchanger or removing the fan,
NOTE
be sure to wear work gloves so as not to injure your
hands by fins of the heat exchanger.
37
Heat exchanger
Fan
Fan bearing