Removing The P.c.board; Removing The Panel Motor - Sanyo SAP-KRV96EHDS Technical & Service Manual

8-5. Removing the P.C.Board

(1) Remove the indicator.
(2) Release the tab 1. Then, release the tab 2 and
separate the electrical component box into 2 parts.
(3) Disconnect all connectors on the control.

8-6. Removing the Panel Motor

(1) Remove the connector of panel motor.
(2) Remove the screw to remove the panel motor.
Panel motor
33
Tab 2
Electrical
component box
Tab 1
Indicator
( )
Release the right
and left side tabs.
Control P.C.Board
Screw
Panel motor
Connector