Product Information; Alert Symbols; Installation Location; Electrical Requirements - Sanyo SAP-KRV96EHDS Technical & Service Manual

PRODUCT INFORMATION

If you have problems or questions concerning your Air
Conditioner, you will need the following information.
Model and serial numbers are on the nameplate on the
bottom of the cabinet.
Model No. __________________________________
Serial No. ___________________________________
Date of purchase _____________________________
Dealer's address _____________________________
Phone number ________________
DECLARATION OF CONFORMITY
This product is marked «
Directive No. 89/336/ EEC, 73/23/EEC, 93/68/EEC and
92/31/EEC.
This declaration will become void in case of mis-usage
and/or from non observance though partial of
Manufacturer's installation and/or operating instructions.

ALERT SYMBOLS

The following symbols used in this manual, alert
you to potentially dangerous conditions to users,
service personnel or the appliance:
This symbol refers to a hazard or
unsafe practice which can result in
severe personal injury or death.
This symbol refers to a hazard or
CAUTION
unsafe practice which can result in
personal injury or product or property
damage.

INSTALLATION LOCATION

• We recommend that this air conditioner be
installed properly by qualified installation
technicians in accordance with the Installation
Instructions provided with the unit.
• Before installation, check that the voltage of the electric supply
in your home or office is the same as the voltage shown on the
nameplate.
• Do not install this air conditioner
where there are fumes or flammable
gases, or in an extremely humid
space such as a greenhouse.
• Do not install the air conditioner
where excessively high heat-
generating objects are placed.
Avoid:
To protect the air conditioner from heavy corrosion, avoid installing
the outdoor unit where salty sea water can splash directly onto it
or in sulphurous air near a spa.
OI-925-3-EG
» as it satisfies EEC
ELECTRICAL
REQUIREMENTS
1. All wiring must conform to the local electrical codes.
Consult your dealer or a qualified electrician for
details.
2. Each unit must be properly grounded with a ground
(or earth) wire or through the supply wiring.
3. Wiring must be done by a qualified electrician.

SAFETY INSTRUCTIONS

• Read this Instruction Manual carefully before
using this air conditioner. If you still have any
difficulties or problems, consult your dealer for
help.
• This air conditioner is designed to give you
comfortable room conditions. Use this only for its
intended purpose as described in this Instruction
Manual.
• Never use or store gasoline or other
flammable vapor or liquid near the
air conditioner — it is very
dangerous.
• This air conditioner has no ventilator
for intaking fresh air from outdoors.
You must open doors or windows
frequently when you use gas or oil
heating appliances in the same
room, which consume a lot of
oxygen from the air. Otherwise there
is a risk of suffocation in an extreme
case.
• Do not turn the air conditioner on
CAUTION
and off from the power mains switch.
Use the ON/OFF operation button.
• Do not stick anything into the air
outlet of the outdoor unit. This is
dangerous because the fan is
rotating at high speed.
• Do not let children play with the air
conditioner.
• Do not cool or heat the room too
much if babies or invalids are
present.
EG
3