Supermicro Supero 7037A-I User Manual page 80

S W
uper orkstation 7037A-I User's Manual
QPI Link Frequency Select
Use this feature to select the desired QPI frequency. The options are Auto, 6.4
GT/s, 7.2 GT/s, and 8.0 GT/s.
DIMM Confi guration
Current Memory Mode
This item displays the current memory mode.
Current Memory Speed
This item displays the current memory speed.
Mirroring
This item displays if memory mirroring is supported by the motherboard.
Sparing
This item displays if memory sparing can be supported by the motherboard.
DIMM Information
P1/P2-DIMMA1/A2, P1/P2-DIMMB1/B2, P1/P2-DIMMC1/C2, P1/P2-DIMMD1/
D2
The status of the memory modules specifi ed will be displayed as detected by
the BIOS.
CPU Socket 0 DIMM Information/CPU Socket 1 DIMM Information
Memory Mode
When Independent is selected, all DIMMs are available to the operating system.
When Mirroring is selected, the motherboard maintains two identical copies of all
data in memory for data backup. When Lockstep is selected, the motherboard
uses two areas of memory to run the same set of operations in parallel. The
options are Independent, Mirroring, Lockstep and Sparing.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other
than what the system is specifi ed in the specifi cation. The options are Auto,
Force DDR3-800, Force DDR3-1066, Force DDR3-1333, Force DDR3-1600
and Force SPD.
Channel Interleaving
This feature selects from the different channel interleaving methods. The options
are Auto, 1 Way, 2 Way, 3, Way, and 4 Way.
7-10