Supermicro Supero 7037A-I User Manual page 37

Ranks Per
DIMM & Data
Width (Note 1)
QRx4 (DDP)
(Note 7)
QRx8 (P)
(Note 8)
Notes:
1. Physical Rank is used to calculate DIMM capacity.
2. Command Address Timing is 1N.
3. Only 2Gb/4Gb DRAMs are supported and validated.
4. The speeds listed are estimated only and will be verifi ed through
simulation.
5. Please refer to the ES-4600 Platform Design Guide for memory
population rules.
6. For 3SPC/3DPC-Rank Multiplication (RM) is >=2.
7. DDP is for Dual Die Package DRAM stacking.
8. "P" Means "Planer Monolithic DRAM Die."
Notes and Restrictions
•
For the memory modules to work properly, please install DIMM modules in pairs
(with an even number of DIMMs installed).
•
All channels in a system will run at the fastest common frequency.
Chapter 5: Advanced Serverboard Setup
LRDIMM Memory Support
Memory Capacity Speed (MT/s) and Voltage
Per DIMM (Note 2) Validated by Slot Per
Channel (SPC) and DIMM
Per Channel (DPC) (Notes
2 Slots Per Channel
1.35V
16GB 32GB 1066
8GB 16GB 1066
5-13
3, 4, 5, 6)
1DPC/2DPC
1.5V
1066, 1333
1066, 1333