Supermicro Supero 7037A-I User Manual page 36

S W
uper orkstation 7037A-I User's Manual
Ranks Per
DIMM & Data
Width
SRx8
Non-ECC
DRx8
Non-ECC
SRx16
Non-ECC
SRx8 ECC
DRx8 ECC
Notes:
1. 1Gb/2Gb/4Gb DRAMs are supported; however, only 2Gb and 4Gb DRAMs are validated.
2. Command Address Timing is 1N for 1DPC and 2N for 2DPC.
3. ES-4600 4S platforms do not support 3DPC UDIMMs.
4. Please refer to the ES-4600 Platform Design Guide for memory population rules.
Ranks Per
DIMM & Data
Width
SRx8
DRx8
SRx4
DRx4
QRx4
QRx8
Notes:
1. 1Gb/2Gb/4Gb DRAMs are supported; however, only 2Gb and 4Gb DRAMs are validated.
2. Command Address Timing is 1N.
3. Please refer to the ES-4600 Platform Design Guide for memory population rules.
4. QR RDIMMs are supported but not validated. Memory testing are limited to system level
testing. Signal integrity testing in interoperability testing are not performed. The passing QR
RDIMMs will be posted on the website.
UDIMM Memory Support
Memory Capacity
Per DIMM (Note 1)
1GB 2GB 4GB
2GB 4GB 8GB
512MB 1GB 2GB
1GB 2GB 4GB
2GB 4GB 8GB
RDIMM Memory Support
Memory Capacity
Per DIMM (Note 1)
1GB 2GB 4GB
2GB 4GB 8GB
2GB 4GB 8GB
4GB 8GB 16GB
8GB 16GB 32GB
4GB 8GB 16GB
5-12
Speed (MT/s) and Voltage Validated by
Slot Per Channel (SPC) and DIMM Per
Channel (DPC) (Notes 2, 3, 4)
2 Slots Per Channel
1DPC 2DPC
1.35V 1.5V 1.35V
n/a 1066, n/a
1333
n/a 1066, n/a
1333
n/a 1066, n/a
1333
1066, 1066, 1066
1333 1333
1066, 1066, 1066
1333 1333
Speed (MT/s) and Voltage Validated by
Slot Per Channel (SPC) and DIMM Per
Channel (DPC) (Notes 2, 3, 4)
2 Slots Per Channel
1DPC 2DPC
1.35V 1.5V 1.35V
1066, 1066, 1066
1333 1333
1066, 1066, 1066
1333 1333
1066, 1066, 1066
1333 1333
1066, 1066, 1066
1333 1333
800 1066 800
800 1066 800
1.5V
1066,
1333
1066,
1333
1066,
1333
1066,
1333
1066,
1333
1.5V
1066,
1333
1066,
1333
1066,
1333
1066,
1333
800
800