Supermicro Supero 7037A-I User Manual page 31

Warning: You can only install the CPU to the socket in one direction. Make
sure that the CPU is properly inserted into the socket before closing the
load plate. If it doesn't close properly, do not force it as it may damage
!
your CPU. Instead, open the load plate again and double-check that the
CPU is aligned properly.
7. With the CPU in the socket, in-
spect the four corners of the CPU
to make sure that they are fl ush
with the socket.
8. Close the load plate. Lock the
lever labeled 'Close 1st', then lock
the lever labeled 'Open 1st'. Use
your thumb to gently push the
load levers down until the lever
locks.
Chapter 5: Advanced Serverboard Setup
Gently close
the load plate.
Push down and lock the
level labeled 'Close 1st'.
Lever Lock
5-7
Push down
and lock the
lever labeled
'Open 1st'.