Table of Contents
Advertisement
S
W
uper
orkstation 7037A-I User's Manual
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each port, one LED indicates activity
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
Onboard Power LED
An Onboard Power LED is located at
LE1 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table at right
for more information.
5-12 SATA Ports
SATA Ports
Two SATA3 Ports (I-SATA0/1), col-
ored in white, and four SATA2 Ports
(I - SATA 2~ 5) are loc ated on the
serverboard. These ports provide
serial-link signal connections, which
are faster than the connections of
Parallel ATA. See the table on the right
for pin defi nitions.
LAN1/2 LED
(Connection Speed Indicator)
LED Color
Defi nition
Off
No Connection or 10 Mb/s
Green
100 Mb/s
Amber
1 Gb/s
Onboard PWR LED Indicator (LE1)
LED Defi nitions
LED Color
Status
Off
System Off (PWR cable
not connected)
Green
System On
Green:
ACPI S1 State
Flashing
Quickly
Green:
ACPI S3 (STR) State
Flashing
Slowly
SATA Port
Pin Defi nitions
Pin#
Defi nition
1
Ground
3
TXN
5
RXN
7
Ground
5-28
Pin #
Defi nition
2
TXP
4
Ground
6
RXP
Advertisement
Table of Contents
