Appendix; Parent Unit Display Screen Messages - VTech Safe & Sound User Manual

Appendix

Parent unit display screen messages

Battery low at CAM #
Battery low at Parent Unit
Battery empty at Parent Unit
Battery empty
Powering off ...
No link to CAM #
Only one camera paired.
View switching requires
additional cameras.
Sound detected at CAM #
Temperature too low at CAM #
Temperature too high at CAM #
Waiting for linking...
When the baby unit is powered by batteries, the stated
baby unit batteries need to be changed. It will be
powered off after 30 seconds automatically.
When the parent unit is powered by the rechargeable
battery and the battery level is low, it needs to
be recharged.
When the parent unit is powered by the rechargeable
battery and it is almost depleted, it needs to be
recharged. The parent unit will be powered off after
10 seconds.
The parent unit battery is depleted and the parent unit
is turning off.
The selected camera slot is not linked to the
parent unit.
You try to view in multi-CAM mode but you have only
one paired baby unit.
There are sounds detected from the selected baby unit
while viewing in multi-CAM mode.
The temperature detected from the selected baby unit
is below the set minimum temperature.
The temperature detected from the selected baby unit
is above the set maximum temperature.
The link between the parent unit and the selected
baby unit is lost, or the selected baby unit is out of
range, or the selected camera slot is empty.
When you have only one paired baby unit and the
link is lost, or you have multiple paired baby units
and the links are lost, Waiting for linking... displays
for 10 seconds and then the screen turns off.
32