Parent Unit Settings; Using The Menu; Monitoring Mode - VTech Safe & Sound User Manual

Parent unit settings

Using the menu

To enter the parent unit menu:
Press MENU/
1.
2. Press or
/SELECT or
MENU
3. Press or
side. Press
MENU
/SELECT to confirm your selection. You hear a confirmation tone.
MENU
To return to the previous menu, press

Monitoring mode

You can choose to monitor in CAM X, Split CAM or Patrol Mode if
there are more than one baby units in your system. The monitoring
mode is preset to CAM 1.
To change the monitoring mode:
1. Press MENU/
2. Press or
or .
3. Press or
• CAM X - The parent unit only displays image of the corresponding
baby unit. You may change to view images from different baby units by
pressing
• Split CAM - The parent unit displays multiple baby unit images in a
maximum of four in one screen.
• Patrol Mode - The parent unit patrols to display images from different
baby units in every 7 seconds. You may change to view images from
different baby units even though the scanning period is not expired by
pressing
/SELECT to confirm your selection.
4. Press
MENU
Monitoring mode is not applicable when there is only one baby unit.
when the parent unit is not in use.
SELECT
until the desired feature is highlighted on the left side. Press
to enter that feature menu.
until the desired feature or option is highlighted on the right
/SELECT or
when the parent unit is idle
SELECT
to choose MONITORING MODE,then press
to choose CAM X, Split CAM or Patrol Mode.
in this mode (page 31).
in this mode (page 31).
to enter that feature menu, or press
/BACK.
21
/SELECT
MENU