Unpair Cam; Language - VTech Safe & Sound User Manual

Parent unit settings
Pair/unpair CAM (continued)

Unpair CAM

Make sure you power on the baby unit and the parent unit before
unpairing the baby unit.
To unpair a baby unit:
On the idle parent unit, press MENU/
1.
2. Press or
3. Press or
for 5 seconds.
4. When unpairing is successful, you hear a confirmation tone. The
corresponding baby unit slot shows CAM X(EMPTY). If there is no paired
baby unit, the screen displays No CAM paired.

Language

You can select a language (English, French or Spanish) to be
used in all screen displays. The screen display language is
preset to English.
To change the language:
Press MENU/
1.
2. Press or
IDIOMA if Spanish is set), then press
3. Press or
/SELECT to confirm your selection. You hear a confirmation tone.
MENU
to choose PAIR CAM, then press
to choose a desired baby unit, then
when the parent unit is not in use.
SELECT
to choose LANGUAGE (LANGUE if French is set, or
to choose English, Français or Español, then press
.
SELECT
MENU
press and hold
/SELECT or
MENU
28
/SELECT or
.
and
.