Appendix
Troubleshooting
If you have dfficulty wth your audo montor, please try the
suggestons below.
My audio monitor does not work at all.
•
Make sure the baby unt, parent unt and the batteres are nstalled
and charged correctly. For optmum daly performance, charge the
parent unt when t s not n use.
•
Make sure the power adaptors are securely plugged nto the outlet
not controlled by a wall swtch.
•
Make sure the adaptor cords are plugged firmly nto the baby unt
and parent unt.
•
Make sure the baby unt and the parent unt are turned on.
•
The parent unt may be too far away from the baby unt. Move the
parent unt closer to the baby unt (but not less than 1.5 metres).
•
Unplug the electrcal power to the baby unt and parent unt. Wat
for approxmately 15 seconds, then plug t back n. Turn on the baby
unt and the parent unt. Allow up to one mnute for the baby unt
and the parent unt to synchronse.
•
Charge the batteres n the parent unt for up to 12 hours.
•
If the parent unt batteres are completely depleted, they may take
up to 30 mnutes to charge the parent unt before t can be used for
a short tme.
•
Remove the batteres and then nstall them agan. If that stll does
not work, t may be necessary to purchase new batteres.
•
Large obstructons may mpact the recepton. Try to relocate the
baby unt, away from large obstructons such as walls and doors.
•
Other electronc products may cause nterference wth your audo
montor. Try nstallng your audo montor as far away from these
electronc devces as possble: wreless routers, rados, cellular
telephones, ntercoms, room montors, televsons, personal
computers, ktchen applances and cordless telephones.
The audio monitor produces high-pitched noise.
•
The parent unt may be too close to the baby unt. Make sure the
parent unt and the baby unt are at least 1.5 metres away from one
another.
9