Test Your Video And Audio Monitor Before Use - VTech Safe & Sound User Manual

Getting started

Test your video and audio monitor before use

It is important to test the video and audio monitor when it is installed initially,
and at regular times thereafter. Test your parent unit and baby units if they
have not been used for a long time or you suspect they are defective.
To test your video and audio monitor:
1. Place the parent unit and the baby units in the same room to test the
product. Make sure the baby units are at least 3 feet away from the
parent unit.
2. Press and hold
3. Press and hold
Waiting for linking ...
4. Press repeatedly on the parent unit to view images from all baby units.
If you have only one baby unit, the parent unit displays an image from the
baby unit. Your video and audio monitor is now ready for use.
If no connection can be established, the parent unit displays
for a few seconds. Then it displays Waiting for linking ...
on the baby units until the
on the parent unit until the screen displays
(on/off) lights turn on.
20
No link to CAM #
and .