Table of Contents
Advertisement
Parent unit settings
Sensitivity
You can use the parent unit to change the sound sensitivity level of
the baby units from Level 1 to Level 5 (Maximum). The higher the
sound sensitivity level is set, the more sensitive the baby unit is in
detecting sounds for transmitting to the parent unit. The sensitivity
level is preset to Level 3.
If you want the baby unit to be very sensitive in detecting sounds, you may set
the sensitivity level to Level 5 (Maximum), so that the baby unit will always
detect any sounds including background noises for transmitting to the parent
unit. If you want the baby unit to be less sensitive in detecting sounds, you may
set the sensitivity level to a lower level (Level 1 to Level 4), so that the baby
unit will transmit sounds to the parent unit only when your baby is very noisy or
crying loudly.
To set the sound sensitivity level of the baby unit:
Press MENU/
1.
2.
Press
or
3.
Press
or
/SELECT or
MENU
4.
Press
or
confirm your selection. You hear a confirmation tone.
To enter the sensitivity menu of the parent unit, the baby units must be
turned
on.
when the parent unit is not in use.
SELECT
to choose SENSITIVITY, then press
to choose a desired baby unit or all baby units, then press
.
to scroll through the choices, then press
MENU
23
/SELECT or
.
/SELECT to
MENU
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Safe & Sound and is the answer not in the manual?
Questions and answers
Keeps peeping every few minities
The VTech Safe & Sound may keep beeping every few minutes due to the low battery tone alert or the no link alert. The low battery tone alert beeps when the parent unit or baby unit has a low battery. The no link alert beeps when the connection between the parent unit and baby unit is lost.
This answer is automatically generated