Paper Mis-Feed From Tray 2 - Xerox Phaser 3425 Service Manual

Paper Mis-feed from Tray 2

Troubleshooting References
Applicable Parts
Main Board
Tray 2 Pick-Up Roller
Tray 2 Assembly
Procedure
Step Action and Questions
Is paper loaded correctly?
1 a.
Is the tray damaged?
2 a.
Are parts missing?
b.
Is Tray 2 Feed Solenoid release arm binding
3 a.
or unable to move freely? Refer to "Service
Diagnostics Menu Map" on page 3-9.
Does Tray 2 Pick Roller rotate when the
4 a.
Solenoid actuates? Refer to "Service
Diagnostics Menu Map" on page 3-9.
Is the feed roller dirty?
5 a.
General Troubleshooting
Wiring and Plug/Jack Map References
Yes
Go to Step 2.
Replace Tray 2
Assembly.
Repair or
replace
solenoid.
Go to Step 5.
Clean if dirty.
No
Load paper
correctly.
Go to Step 3.
Go to Step 4.
Replace Pick
Roller
Assembly.
Replace Tray 2
Assembly
Replace Main
Board.
4-7