Front Panel Continually Displays "Output Tray Is Full; Paper Size Switch Assembly - Xerox Phaser 3425 Service Manual

Front Panel Continually Displays "Output Tray Is Full"

1. Empty the output tray.
2.
Ensure that the Output Full Actuator is in the correct position and moves without
binding.
3.
Verify that all harness connections to the Output Full Sensor are secure.
4.
Replace the Output Full Sensor.
5.
Replace the Output Full Sensor Harness.
6.
Replace the Exit Roller Assembly.
7.
Replace the Main Board.

Paper Size Switch Assembly

Paper size and tray installation is determined by a combination of ON/OFF statuses of
the upper, middle, and lower switches of the Switch Paper Size Assembly.
Paper size
LEGAL14"
LEGAL13"
EXECUTIVE
B5
A4
LETTER
A5 (for reference only, supported in Tray 1 only)
No Tray
4-4
Upper
ON
ON
OFF
OFF
OFF
ON
OFF
OFF
Phaser 3425 Laser Printer Service Manual
Switches
Middle Lower
ON OFF
OFF ON
ON ON
OFF ON
ON ON
OFF OFF
OFF OFF
OFF OFF