Table of Contents
Advertisement
NOTE:
To save changes press the [Save] button, to cancel them press the [Cancel] button.
11.3. Motion Detection
To set motion detection go to SETTINGS – Event – Motion Detection. You can set up to
10 independent detection zones which can also cross. To each zone you can set its own
parameters. Motion detection can trigger message or file sending to e-mail, FTP or network
storage, or CGI-command can be sent to HTTP-server. (Рiс. 11.38).
Name: a field which displays the list of motion detection zones. To see one of them on the
screen click it with the left mouse button. After selecting you can also change the parameters of
this zone.
Display All Range: check it to show the borders of all detection zones.
Name: enter a name to create a new detection zone and press the [Add] button to add new
zone to the list.
N300 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Рiс. 11.38
93
Advertisement
Table of Contents
