Table of Contents
Advertisement
Current Date/Time: displays the current date and time of the IP Camera.
PC Clock: displays date and time on a computer, which is used to connect to the camera
(client computer).
Date/Time Format: allows you to select date/time format.
NOTE:
To apply new settings click the [Save] button.
7.2.1. Synchronization Method
Synchronization Method allows you to select how to set the camera date and time.
Keep Current Setting: leaves the current date and time as they are.
Synchronize with client PC: use the same date and time as on a computer, which is
used to connect to the camera.
Manual setting: select this mode to adjust the camera the date and time manually.
Synchronize with NTP: allows you to synchronize your camera clock with an NTP
server (Network Time Protocol) located in the Internet (e.g. time.windows.com,
time.nist.gov, etc). Select an NTP server name and a time update interval (by default,
camera clock is typically updated once an hour).
IMPORTANT:
To synchronize time with an Internet time server, an NTP server must be located in a local network or in
the Internet. The camera must be connected to the Internet to synchronize time with an Internet time
server.
You can choose a NTP server from the list below or specify it manually. Then check its
availability by clicking [Test] button.
N300 Operations User Manual
Chapter 7. The [SETTING] Menu: System
Pic. 7.5
24
Advertisement
Table of Contents
