Figure 19. Select Falling Edge In The Trigger Edge Select Field; Figure 20. Select Camera "Adr Control (Using Light Sensor)" In The Camera Adr Control; Figure 21. Set The Light Sensor Ip Address - JAI IIT Camera Systems VIS-CAM 350 Installation Manual

IIT Camera System Manual

Figure 19. Select Falling Edge in the Trigger Edge Select field

Figure 20. Select Camera "ADR Control (using Light Sensor)" in the Camera ADR
Control

Figure 21. Set the Light Sensor IP address

As described in the VIS-CAM System Installation manual section 4.
System Set-Up 27