MBT-4000 Multi-Band Transceiver System
Flash Upgrading
When prompted, reconnect
9
the power cable to the Base
Unit.
Once communication has
been established between
the PC and MBT-4000, the
upload will take place – do
not interrupt this upload
process.
10
Note: If the upload is not
successful for any reason –
e.g., the communications
cable is not physically
connected, the wrong COM
port has been specified, the
user inadvertently interrupted
the upload, etc. – the user
may troubleshoot the setup
as needed, then click on
'Repeat Upload' or 'Go
Back to Start' to
resume/retry the upload
process.
5–5
Revision 4
MN/MBT4000.IOM