Conventions And References; Cautions And Warnings; Recommended Standard Designations; Trademarks - Comtech EF Data MBT-4000 Installation And Operation Manual

Multi-band transceiver system

Hide thumbs Also See for MBT-4000:

Table of Contents

MBT-4000 Multi-Band Transceiver System

Preface

Conventions and References

IMPORTANT or NOTE indicates information critical for proper equipment function.

IMPORTANT

CAUTION indicates a hazardous situation that, if not avoided, may result in

minor or moderate injury. CAUTION may also be used to indicate other unsafe

practices or risks of property damage.

CAUTION

WARNING indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury.

WARNING

Recommended Standard (RS) Designations have been superseded by the new designation of the

Electronic Industries Association (EIA). References to the old designations are shown only when

depicting actual text displayed on the screen of the unit (RS-232, RS-485, etc.). All other references

in the manual will be shown with the EIA designations.

Other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies and are hereby acknowledged.

Metric conversion information is located on the inside back cover of this manual. This information

is provided to assist the operator in cross-referencing non-metric to metric conversions.

viii

Revision 4

MN/MBT4000.IOM

Table of Contents

Do you have a question about the MBT-4000 and is the answer not in the manual?