Command
radius accounting-group <group-numb
ZXR10(config)#
er>
Command
radius authentication-group
ZXR10(config)#
<group-number>
Step Command
1
ZXR10(config-acctgrp-1)#
2
ZXR10(config-acctgrp-1)#
round-robin}
3
ZXR10(config-acctgrp-1)#
4
ZXR10(config-acctgrp-1)#
Format number>
5
ZXR10(config-acctgrp-1)#
6
ZXR10(config-acctgrp-1)#
disable}
7
ZXR10(config-acctgrp-1)#
8
ZXR10(config-acctgrp-1)#
address>
9
ZXR10(config-acctgrp-1)#
ss> key <keystr> port <portnum>
Configuring a RADIUS Authentication
Group
To configure RADIUS authentication group, use the following com-
mand.
Configuring RADIUS Parameters
To configure RADIUS parameters, perform the following steps.
timeout <timeout>
algorithm {first |
alias <name-str>
calling-station-format <
deadtime <time>
local-buffer {enable |
max-retries <times>
nas-ip-address <NAS IP
server <number><ipaddre
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 13 Network Management Configuration
Function
This configures RADIUS
accounting group
Function
This configures RADIUS
authentication group
Function
This configures RADIUS
timeout
This configures algorithm of
RADIUS server
This configures byname of
RADIUS server group
This defines format of
calling-station-id field
This configures dead-time of
authentication server
This clears local buffer of
accounting server
This configures retransmis-
sion times of RADIUS server
This configures nas-ip of
RADIUS server
This configures RADIUS
server and its parameters
131