Configuring Cli Privilege Classification; Configuring Telnet User; Figure 14 Cli Privilege Classification Function - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (Basic Configuration Volume)
F 14 CLI P
IGURE RIVILEGE
Privilege Level
Maintenance of
Commands
Privilege Level
Maintenance of
Users
38 Confidential and Proprietary Information of ZTE CORPORATION
C F
LASSIFICATION UNCTION
When a device is booted, each command has a default privilege
level. Administrators can modify the privilege levels of the com-
mands.
Administrators also can modify the privilege levels of the users
who log into the switch. When a user's privilege level is the same
with or higher than the privilege level of a command, the user can
use the command.
Configuring CLI Privilege
Classification

Configuring Telnet User

Considering security, the privilege level of a user only can be con-
figured by the administrators. That is, after a user logs in to the
switch, the user can not modify own login password and privilege
level. Administrators do not need to check the password when
modifying the privilege level of the user.
To configure the privilege level of a telnet login user, use the fol-
lowing command.