Configuring Tail Discarding; Configuring Cos Discarding Priority Mapping - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10(config)#
queue-id <queue-id><green-threshold><yellow-thr
eshold><red-threshold>
2
ZXR10(config)#
3
ZXR10(config-if)#
<session-index>
Example
Step Command
1
ZXR10(config)#
y><cos-1-drop-priority><cos-2-drop-priority><cos-3-
drop-priority><cos-4-drop-priority><cos-5-drop-priori
ty><cos-6-drop-priority><cos-7-drop-priority>
2
ZXR10(config)#
3
ZXR10(config-if)#
100 Confidential and Proprietary Information of ZTE CORPORATION

Configuring Tail Discarding

To configure tail discarding, perform the following steps.
qos tail-drop <session-index>
interface <interface-name>
drop-mode tail-drop
This example shows how to configure tail discarding. Configure tail
discarding function on gei_1/1. Yellow packets with waterline 100,
red packets with waterline 120 and green packets with waterline
120 are discarded.
ZXR10(config)#qos tail-drop 1 queue-id 1 120 100 120
ZXR10(config)#interface gei_1/1
ZXR10(config-if)#drop-mode tail-drop 1
Configuring COS Discarding Priority
Mapping
To configure COS discarding priority mapping, perform the follow-
ing steps.
qos cos-drop-map <cos-0-drop-priorit
interface <interface-name>
trust-cos-drop enable
Function
This configures parameters of
packets to be discarded
This enters interface
configuration mode
This discards packets
Function
This configures parameters of
COS discarding priority
This enters interface
configuration mode
This applies COS discarding
priority mapping function