Figure 4-10. Interface Terminal Locations; Installing Interface Wiring And Connections; Installing Building Alarm Wiring And Connections - Eaton 9E Generation 3 Installation And Operation Manual
20–30 kva (208/220v)
Hide thumbs
Also See for 9E Generation 3:
- Installation and operation manual (114 pages) ,
- Manual (41 pages) ,
- Advanced user's manual (30 pages)
Table of Contents
Advertisement
UPS System Installation
4.11
Installing Interface Wiring and Connections
4.11.1 Installing Building Alarm Wiring and Connections
To install wiring:
1.
Verify the UPS system is turned off and all power sources are removed. See Chapter 6, "UPS Operating
Instructions, " for shutdown instructions.
2.
To locate the appropriate terminals and review the wiring and termination requirements, see
paragraph 3.2.3, Table 4-1, Figure 4-10, Figure 4-11, and Figure 4-12.
Mini-Slot Communication Bays
(See Figure 4-11 for detail)
Figure 4-10. Interface Terminal Locations
4-12
Eaton 9E UPS (20–30 kVA, 208/220V) Generation 3 Installation and Operation Manual P-164000301—Rev 1
Interface Terminals
(See Figure 4-11 for detail)
Back
Top Rear Panel
www.eaton.com/powerquality
Advertisement
Table of Contents
