Intek M-795 Power Owner's Manual page 6

LCD Display
A
P
O
N
A. TX Icon
The TX icon is lighted when radio is in transmit mode.
B. RX Icon
The RX icon is lighted when radio is in receive mode.
C. FM Icon
The FM icon is lighted when radio receives and transmits in FM mode (frequency modulation).
D. M Icon
Not used.
E. LOW Icon
The LOW icon is lighted when the transmitter is in the LOW POWER (1W) mode.
F. DW Icon
The DW icon is lighted when the DUAL WATCH function (automatic monitoring of two channels) is enabled.
G. Frequency Band ID Code
It indicates the programmed frequency band ID code (i.e. DE, UK, CE, etc.).
H. S/RF Digital Meter
A digital 10-bar S/RF METER indicates the strength of the received signal (from S0 to S9+30) in the receive mode
and the transmitter RF output power (0 to 4W) in the transmit mode.
I. AM Icon
The AM icon is lighted when radio receives and transmits in AM mode (amplitude modulation).
L. ESP C E Icon
The ESP C E icon is lighted when the ESP (Electronic Speech Processor) function has been enabled. The ESP is an
RX & TX electronic modulation processor.
Controls and operation
B C D
C E
M L
- 4 -
E
F
G
H
I