Print After Checking Printing Result - Proof Print; About Proof Print; Configuring Proof Print - Xerox Phaser 6280 User Manual

Print After Checking Printing Result - Proof Print

When the hard drive or additional memory is added, you can use the proof print feature.
Note:

About Proof Print

Proof Print is a feature that allows you to store the print data of multiple copies in the
memory, print out only the first set to check the print result and if satisfactory, print the
remaining copies from the control panel.
Proof print data that has become redundant can be deleted using the control panel. See
Printing from the Control Panel
To delete all proof print data that has become redundant, see

Configuring Proof Print

The procedure to configure Proof Print using the PCL or PostScript print driver is as follows.
First of all, carry out the proof print settings at the computer and send data to the printer
for printing. Then, carry out the output procedure at the printer to output the printed
pages.
Printing from the Computer
Note:
the PCL print driver or the Device Settings tab using the PostScript print driver. The RAM
disk also needs to be enabled via the control panel. For instructions about enabling options,
see
1. From the File menu, select Print.
2. Select the printer, and click Preferences or Properties.
3. Click the Paper/Output tab.
4. In the Job Type field, select Proof Print .
5. Click the Setup button.
6. In the Username field, enter your user name.
7. If you want to use a specified document name to access the document from the
8. If you want the printer to automatically name the document using a time stamp, in
9. Click OK twice to accept the Secure Print settings, and then click Print to send the job.
Downloaded From ManualsPrinter.com Manuals
The data stored in the RAM disk is erased when the printer is switched off.
Ensure the RAM disk is set to available . You can find this under the Options tab using
Enabling Options on page 134.
control panel:
a. In the Retrieve Document Name field, select Enter Document Name .
b. In the Document Name field, enter the name that will appear on the control panel.
the Retrieve Document Name field, select Use Existing Name .
Now follow the instructions in Printing from the Control Panel, below, to continue
printing the job.
Print After Checking Printing Result - Proof Print
on page 88.
Phaser® 6280 Printer
87
System Setup on page 98.