Canon iPF6100 Service Manual page 270

Chapter 4
b) Removing the main controller mounting plate
1) Remove the main controller PCB.
2) Free the harness from the harness guide.
3) Remove the screw [1] and remove the flexible guide [2].
4) Remove the four screws [1] and two hooks [2] from the harness guide and remove the main controller mounting plate [3].
c) Note on installing the cable holder
In installing the cable holder, secure ferrite core [1] to the flexible cable on the carriage with the cable holder before hooking the flexible cable from the operation
panel at the three claws [2].
4-46
[1]
F-4-101
[5]
[3]
F-4-102
[1]
F-4-103
[2]
[4]
[3]
[2]