Canon iPF6100 Service Manual page 437

Display massage
Ink tank:BK error 03830304-256C
Press OK and
replace ink tank.
Top cover is open. 03031000-2E0F
Turn off printer,
wait a while, and
turn it on again.
Ink tank cover 03031000-2E10
is open.
Turn off printer,
wait a while, and
turn it on again.
Maintenance 03841001-2819
cartridge full.
Replace
the maintenance
cartridge.
No Maintenance 03841001-281B
Cartridge capacity.
Replace
the maintenance
cartridge.
No maintenance 03841101-2818
cartridge.
Check
the maintenance
cartridge.
Maintenance 03841201-2816
cartridge problem.
Replace
the maintenance
cartridge.
Maintenance 03841201-2817
cartridge problem.
Replace
the maintenance
cartridge.
Roll printing is 03860002-2E0A
selected, but sheets
are loaded.
Press OK,
remove the sheets,
and load a roll.
Borderless printng 03861001-2405
not possible. Check
roll width and
spacers.
Online: Print
Load/Eject:
Change Paper
Borderless printng 03861001-2406
not possible. Check
paper size setting.
Online: Print
Load/Eject:
Change Paper
Insufficient paper 03862000-2E09
for job
Online: Print
Stop: Stop Printing
Load/Eject:
Change Paper
Wrong paper size. 03063000-2E08
Check paper size
setting on computer.
Online: Print
Stop: Stop Printing
Cannot cut paper. 03870001-2015
Press Load/Eject
and reload the
paper.
Code* Condition detected
G ink tank EEPROM error
Top cover abnormally open
Ink tank cover abnormally open
Maintenance cartridge full
Not enough space in the maintenance
cartridge prior to cleaning
Maintenance cartridge not available
Maintenance cartridge EEPROM error
Maintenance cartridge ID error
Data with a roll media specification has
been received when a sheet tray is
loaded.
Paper loaded at a position inaccessible
for borderless printing
Data unfit for borderless printing
Not enough roll media on remaining roll
media quantity detection
Mismatch between data width and paper
width
Cutting failure
Action
Renew the G ink tank
Close the top cover and turn on the printer again.
Close the ink tank cover and turn on the printer again.
Renew the maintenance cartridge.
Replace the maintenance cartridge.
Set a maintenance cartridge.
Insert the maintenance cartridge fully into position.
Renew the maintenance cartridge.
Renew the maintenance cartridge.
Reload the cut sheets.
Check to see if a borderless printing spacer is installed.
Reload the paper.
Check the paper size.
Change the paper size.
Renew the supply of roll media.
Verify the paper size setting.
Cut paper manually.
Check the cutter.
Chapter 8
8-13