Operation Sequence At Power-Off - Canon iPF6100 Service Manual

2.2.2 Operation Sequence at Power-off

iPF6100 / iPF6200 / iPF6000S
Turning off the power cuts off the voltage to all drive systems. At this time, the firmware starts the power-off sequence as shown below.
This printer immediately suspends all operations in progress and stops whenever the power cord is unplugged or a cover such as the top cover is opened. In this
case, the printer may stop without capping the print head. If the power was turned on by unplugging the power cord, plug the power cord into the outlet, turn on the
power again so that the printer enters the online or offline state, and then press the Power button to turn off the power.
Power button OFF
Media ejection
Power-off automatic recovery
Capping
Sensor system power OFF
Backup of various data
Power-off
Hold down for at least once second
If media remains,it is ejected even
when printing is in progress.
Writing to EEPROM
F-2-11
Chapter 2
0012-6494
2-11