Canon iPF6100 Service Manual page 243

3) Remove the screw[1] and clamp[2] and slide cutter unit[3] to left obliquely upward out of position.
b) Points to note on Disassembly an Reassembly of Cutter unit
1) When disassembling or reassembling the cutter unit, align the cutter unit roller with the grooves[1] in the cutter lifter unit and cutter drive unit.
c) Removing the cutter mounting plate
1) Remove the cutter unit.
2) Remove the two screws[1] and connector[2] and free the harness from harness guide[3] to remove the cutter mounting plate[4].
[1]
[2]
[2] [1]
[3]
F-4-36
F-4-37
[4] [3]
[1]
F-4-38
[1]
Chapter 4
4-19