If roll media are used, the cutter unit attached on the front of the spur unit cuts the leading end of the media on loading and cuts the media on ejection. Whether to

perform cutting or not is determined by the choice of the main menu and the specifications of the printer driver.

The cutter in the cutter unit stands by at the cutter home position, except when it cuts roll media. Power from the cutter drive motor is imparted to the circular belt

to move the cutter from left to right for cutting roll media.

2-48

Cutter HP sensor

Cutter right position

sensor

F-2-43

Cutter

Cutter motor

0016-8205

Table of Contents