Advertisement
1.
Resetting the safety thermostats, circuit breakers, overload protectors, or
fuse replacements unless warranted conditions are the cause.
2.
All problems due to operation at voltages other than specified on equipment
nameplates - conversion to correct voltage must be the customer's
responsibility.
3.
All problems due to electrical connections not made in accordance with
electrical
4.
Calibration of heat controls after the first sixty (60) days on original
components.
as knobs,
light bulbs, baskets, grids, mechanical timers and thermocouples.
Normal maintenance functions including lubrication, adjustments of airflow,
thermostats, door mechanisms, microswitches, burners and pilot burners and
replacement of fuses and indicating lights are not covered by warranty.
5.
All fry pots welded in the field.
6.
Deterioration of aluminum vessels due to insertion of food product or use of
abrasive cleaners
7.
Full use, care, and maintenance instructions are supplied with each machine.
Those miscellaneous adjustments noted are customer responsibility.
attention will prolong the life of the machine.
8.
Travel mileage
Agency or one of its sub-service agencies.
9.
All labor shall be performed during regular working hours. Overtime premium
will be charged to the buyer.
10.
All genuine Wells replacement parts are warranted for ninety (90) days from
date of purchase on non-warranty equipment. This parts warranty is limited only
to replacements of the defective part. Any use of non-genuine Wells parts
completely voids any warranty.
11.
Installation, labor, and job check-outs are not considered warranty.
11
WELLS MANUFACTURING COMPANY
SERVICE POLICY AND PROCEDURE GUIDE
ADDITIONAL WARRANTY EXCLUSIONS
code requirements
Replacement of items subject to normal wear to include such items
is not covered by warranty.
is
limited to
and wiring diagrams supplied with the equipment.
sixty
(60)
miles
Proper
from an Authorized Service
Advertisement
